Slicer

Computerslicer CCS 602 A 200

Touch Control
Elau drive

High performance Slicer for slicing meat, sausage and cheese
products into slices with adjustable thickness of 0,1 to 50 mm.

The sliced portions are transported by the transfer-unit CCU,
consisting of portioning conveyor and a control conveyor.

Machine control system with user-friendly interface.

Machine made completely of solid stainless steel


Product carrier PZF 10.30.20.000
Carrier unit for product length up to 1,200 mm
Product support belt. The support belt moves forwards up to the slicing bar
after the loading procedure. At the end of each slicing procedure the support
belt is pulled back pneumatically and in this way clears an opening for the
ejection of the end pieces. The conveyor belt runs synchronously with the
gripper by which it is driven. The support conveyor and the conveyor belt can
be removed from the machine.
execution for cheese applications
this includes amongst others:
all product carrying parts coated

Transfer unit CCU 10.10.10.000
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. It is attached to the discharge
side of the Slicer and able to be swung out from the side. The inclination of
the CCU can be set progressively without any tool. The transport means and
the rollers can be easily removed.
CCU standard,
with portioning conveyor and control conveyor.
Portioning conveyor with flat belts,
length of portioning conveyor approx. 170 mm.
Control conveyor with round belts,
length of control conveyor approx. 550 mm.

Knife head MKF 50.00.00.000
Circular knifehead SK 144

Slicing throat SST 80.20.00.000
width adjustable up to 360 mm,
Height adjustable from 125 up to 165 mm
Downholder, pneumatic

Sensor for identification of beginning of product PAS 00.00.00.000
A photo eye is mounted in the product feed area
to identify the beginning or front of the product.

Loading BEL 30.00.00.000
Loading arm for lifting the products from a horizontal position
to the feeding level, with timing belt (length approx. 1,000 mm).
The unit is designed for a maximum product length of 900 mm
and width of 340 mm.
With automatic loading.

Interleaver CCI 20.10.00.000
The Interleaver inserts separating sheets of film or paper between the
slices. The sheets are cut separately from a roll before inserting.
The maximum cutting performance is: 600 rpm.

Tandem-Interleaver
- paper length adjustable from 50 mm up to 110 mm
(depending on cutting capacity)
- paper width 2 x 60 up to 2 x 80 mm
(depending on product dimensions)
- usable materials:
paperweight from 40 up to 60 g/m²
PS-film, film thickness min. 65 µm

Notice:
The function of the Interleaver can only be ensured,
by using the film types being recommended by Weber.

- diameter of paper roll max. 400 mm
- core diameter 76 mm
- width of slicing throat max. 230 mm

possible modes of operation:
- without idle-cuts
- with idle-cuts
- without sheet under the first slice

- with sheet under the first slice
- Interleaver not active

- Interleaver convertible from tandem into mono-operation
- set-up with MONO-Interleaver slicing bar


Checkweigher CCW-200 50.00.00.000
Digital weighing system with transport speed up to 1.300 mm/s.
Weighing housing bevelled. For cleaning it, the checkweigher must not be
dismantled. Checkweigher completely made of stainless steel.

Tandem Checkweigher,
MONO-Weighing-table, length approx. 485 mm, width approx. 375 mm,
capacity up to max. 100 weight measurements/minute
(depending on portions)
max. portions weight 1,000 g,
resolution (precision and display +/- 0,2 g),
weighing-table with round belts.


Rocker CTR-100 20.00.00.000
Rocker enclosed in washdown proof stainless steel cabinet
Tandem rocker,
Length 450 mm, width 2x approx. 240 mm
Execution with flat belts


Transport conveyor CCE 36.20.17.020
Static transport conveyor; heavy version.
Conveyor to transport the portions from the Slicer to the packaging machine.
The conveyor belt can be easily removed from the belt frame without using any
tools. The transport speed is controlled by the Slicer.

Length of transport conveyor, including spanner, approx. 3,600 mm
Table extension of conveyor swinging out,
length of spanner 900 mm, inclinable

Top reject conveyor, length approx. 2,100 mm
Height of conveyors fixed,
Belt-width approx. 420 mm.

Additional increase of the feet SFE 20.00.00.000
For Slicer model SLC.


1 Pc. Slicing bar SKE 30.10.00.000
MONO-Interleaver slicing bar
Slicing bar horizontal, straight

1 Pc. Weber circular knife WKM
Angle, cutting edge 22°
model with teeth
coated, with coated cutting edge.
Diameter 460 mm

1 Pc. Blade guard for Weber circular knife
Blade guard for circular knife of diameter 460 mm

2 Pcs. Downholder NH 20.10.00.000
Downholder pneumatic,
Execution with roller

1 Pc. Automatic round grippers for calibrated products ARK
for 2x caliber from approx. 60 up to 70 mm
for meat and sausage products


Remark:
Circular knives, Product grippers and Downholders are chosen in accordance
with the original customer's products. For automatic products grippers in
combination with preformed slicing bars an application technology test is
always necessary! The number of grippers results from the applications.


- used machine, fully reconditioned