Computer Slicer with cpl. weighing line
Artikel-Nr. 903924
Computerslicer CCS 304 A 200

Touch Control
Jetter Drive

Slicer for slicing meat, sausage and cheese products to slices with
adjustable thickness of 0.1 to 50 mm.

The sliced portions are transported by the transfer-unit CCU,
consisting of a portioning conveyor and a control conveyor.

Machine control system with userfriendly interface. Machine made completely
of solid stainless steel.

Maximal cutting performance 400 slices/minutes.
Carrier unit for product length up to 800 mm,

Product carrier PZF
Carrier unit for product length up to 800 mm.
Execution standard, surface ground.
For meat- and sausage-products.

Transfer unit CCU
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. It is attached to the discharge
side of the Slicer and able to be swung out from the side. The inclination of
the CCU can be set progressively without any tool. The transport means and
the rollers can be easily removed.
CCU standard,
with portioning conveyor and control conveyor.
portioning conveyor with conveyor belts,
portioning conveyor length approx. 170 mm.
Control conveyor with conveyor belt,
control conveyor length approx. 480 mm.

Staggered stack
A slicing option for stacks where each slice is staggered by a distance
which can be set by the user (to an adjustable measurement). The
staggering of the individual slices to each other is adjustable. The
staggering and the slicing speed are depending on the product. To acquire
exact data application tests need to be implemented!

Knife head MKF
Circular knifehead SK 144

Slicing throat SST
Width fixed at 250 mm.
Slicing throat
height fixed at 135 mm.

Interleaver CCI
The Interleaver inserts separating sheets of film or paper between the
slices. The sheets are cut separately from a roll before inserting.

Max. cutting capacity with Interleaver = 300 cuts/minute
- paper length adjustable from 30 mm up to 135 mm
(depending on cutting capacity)
- reference data (cutting capacity of 150 cuts/minute
= max. paper length 135 mm, in case of higher cutting capacity
the max. paper width decreases)
- film width adjustable from 80 mm to 160 mm
- usable materials: PS-films (film thickness min. 75 µm)

The function of the Interleaver can only be ensured by using the film types
being recommended by Weber.

- diameter of roll max. 320 mm
- core diameter 76 mm
- incl. Interleaver slicing bar
Possible modes of operation:

- without sheet under the 1st slice
- Interleaver not active

Checkweigher WEB 99 LC, CCW-100
Digital weighing system with transport speed up to 1,000 mm/s.
Checkweigher completely made of stainless steel.
Mono checkweigher standard,
weighing-table length approx. 485 mm, width approx. 375 mm,
capacity up to max. 90 weight measurements/minute
(depending on portions)
max. portion weight 1,000 g,
resolution (precision and display +/- 1 g)
weighing-table with round belts.

Marking conveyor CMB-100
Stand-alone stainless steel marking conveyor for marking portions
of incorrect weight.
Lateral displacement: approx. 50 mm
Conveyor length: approx. 400 mm
Conveyor width: approx. 420 mm
Execution with round belts.

Transport conveyor CCE-LC
Moveable transport conveyor; light version. Conveyor to transport the
portions from the Slicer to the packaging machine. The conveyor belt can
easily be removed from the frame without using any tools. The transport speed
is controlled by the Slicer. The transport conveyor has got an inclined end.
The height of the transport conveyor (upper edge) can be set to
1,100 mm
1,200 mm
1,300 mm
above the floor.
Length of transport conveyor, including spanner, approx. 2,600 mm.
Belt-width approx. 320 mm

Additional increase of the feet SFE
The increase mainly consists of spacers in order to equal irregularities
of the floor. For Slicer model MLC

1 Pcs. Downholder NH
Downholder, spring-loaded execution
Standard execution with rod

1 Pc. Weber circular knife WKM
Circular knife
model with teeth
coated, with coated cutting edge.
Diameter 460 mm

1 Pc. blade guard for Weber circular blade
for circular blade of diameter 460 mm

1 Pc. Automatic product grippers APR
for product width from 80 up to 100 mm
for product height from 80 up to 100 mm
for meat- and sausage products

Product grippers, downholders & circular knives are chosen in accordance with
the original customer's products. For automatic products grippers in
combination with preformed slicing bars an application technology test is
always necessary! The number of grippers results from the applications.

- used slicing line, fully reconditioned

machine 1 of 36  

© 2020 GPS Reisacher GmbH & Co KG | Imprint | Privacy Policy | Legal/Disclaimer | Google Analytics

pmCMS by pfeifer marketing