Computer Slicer with transport conveyor
Weber
CCS 602 CCL
 
Artikel-Nr. 903971
Computerslicer CCS 602 A 200

Touch Control
Elau drive

High performance Slicer for slicing meat, sausage and cheese
products into slices with adjustable thickness of 0,1 to 50 mm.

The sliced portions are transported by the transfer-unit CCU,
consisting of portioning conveyor and a control conveyor.

Machine control system with user-friendly interface.

Machine made completely of solid stainless steel


Product carrier PZF 10.30.10.000
Carrier unit for product length up to 1,200 mm
Product support belt. The support belt moves forwards up to the slicing bar
after the loading procedure. At the end of each slicing procedure the support
belt is pulled back pneumatically and in this way clears an opening for the
ejection of the end pieces. The conveyor belt runs synchronously with the
gripper by which it is driven. The support conveyor and the conveyor belt can
be removed from the machine.
Execution ground.

Transfer unit CCU 10.10.10.000
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. It is attached to the discharge
side of the Slicer and able to be swung out from the side. The inclination of
the CCU can be set progressively without any tool. The transport means and
the rollers can be easily removed.
CCU standard,
with portioning conveyor and control conveyor.
Portioning conveyor with flat belts,
length of portioning conveyor approx. 170 mm.
Control conveyor with round belts,
length of control conveyor approx. 510 mm.

Knife head MKF 50.00.00.000
Circular knifehead SK 144
Speed increasing ratio 1:7

Slicing throat SST 20.20.00.000
Slicing throat,
width adjustable up to 360 mm,
height fix 125 mm
Downholder, pneumatic

Sensor for identification of beginning of product PAS
A photo eye is mounted in the product feed area to identify
the beginning or front of the product.

Loading BEL 13.00.00.000
Loading arm for lifting the products from a horizontal position
to the feeding level.
The unit is designed for a maximum product length of 1.125 mm
and width of 340 mm.
With automatic loading.


Transport conveyor CCE 41.20.00.020
Static transport conveyor; heavy version.
Conveyor to transport the portions from the Slicer to the packaging machine.
The conveyor belt can be easily removed from the belt frame without using any
tools. The transport speed is controlled by the Slicer.

Length of transport conveyor, including spanner, approx. 4,100 mm
Table extension of conveyor swinging out,
length of spanner 900 mm, inclinable

Height of conveyors fixed,
Belt-width approx. 420 mm.

Additional increase of the feet SFE 10.00.00.000
For Slicer model CCL.


1 Pc. Slicing bar SKE 10.10.00.000
Standard execution
Slicing bar horizontal, straight

1 Pc. Weber circular knife WKM 10.10.20.460
Angle, cutting edge 22°
model without teeth
coated, without coated cutting edge.
Diameter 460 mm

1 Pc. Blade guard for Weber circular knife
Blade guard for circular knife of diameter 460 mm

1 Pc. Downholder NH 20.00.00.000
Downholder, pneumatic execution,
Execution standard with rod

1 Pc. Automatic round grippers for calibrated products ARK 09.00.10.000
for calibre from 96 up to 105 mm
for meat and sausage products


Remark:
Circular knives, Product grippers and Downholders are chosen in accordance
with the original customer's products. For automatic products grippers in
combination with preformed slicing bars an application technology test is
always necessary! The number of grippers results from the applications.


- used machine, fully reconditioned

machine 7 of 36  
 

© 2020 GPS Reisacher GmbH & Co KG | Imprint | Privacy Policy | Legal/Disclaimer | Google Analytics

pmCMS by pfeifer marketing