Computerslicer CCS 903
Touch Control
Elau drive
High Capacity Slicing and Portioning Machine with complete weighing line for
fixed weight portions and with automatic loader.
High performance Slicer for slicing meat, sausage and cheese
products into slices with adjustable thickness of 0.1 up to 50 mm.
Slicing throat, width continuously adjustable up to 440 mm,
(depending on machine execution).
Machine control system with user-friendly interface.
Machine made completely of solid stainless steel.
Product carrier 900 B 10.20.10.010
Carrier unit for product length up to 1.200 mm.
Product support belt. The support belt moves forward up to the slicing bar
after the loading procedure. At the end of each slicing procedure the support
belt is pulled back pneumatically and in this way clears an opening for the
ejection of the end pieces. The conveyor belt runs synchronously with the
gripper by which it is driven. The support conveyor and the conveyor belt can
be removed from the machine.
Execution ground and polished,
without lateral pressure device
The clearance height can be progressively adjusted from 125 to 180 mm.
Transfer unit 900 C 15.50.00.000
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. The basic function can be
implemented with each CCU variant. The transfer unit is attached to the
discharge side of the Slicer. It can be set progressively in a horizontal or
vertical position or at an angle. The transport means and
the rollers can be easily removed for cleaning.
CCU Standard with portioning an control conveyor and expanded as followed:
CCU for stacking and making shaved meat portions. In stacking mode,
the slices cut individually by the slicer are taken from the portioning
conveyor. The portioning conveyor is lowered by the thickness of the
respective cut slice during the slicing procedure in order to maintain the
same drop height for the individual slices.
In shaved meat portioning mode, the slices cut by the slicer are
places on the shaved meat portioning conveyor and transported
on the control conveyor for portioning.
The portioning conveyor passes the portions on to subsequent units.
Length of shaved meat conveyor approx. 260 mm,
Length of control conveyor approx. 600 mm.
Shaved meat conveyor with flat belts,
Control conveyor with round belts.
Slicing bar 900 D 20.10.00.000
Slicing bar carrier with external gap adjustement.
With this system, it is possible to adjust the cutting gap progressively
from the operator side of the machine housing.
The clearance height can be adjusted in steps.
Preformed slicing bar
Completely made of stainless steel
Slicing bar fourfold round, for caliber 95 - 98 mm
Knife head 900 E 10.00.00.000
Sickle knife head WSK 3
Top product guide 900 F 10.00.10.000
Drive system for guiding the product from above,
attached to the knife head housing.
With pneumatic downholders.
Loading 900 G 20.00.10.000
Loading arm for lifting the products from a horizontal position
to the feeding level.
The unit is designed for a maximum product length of 1.200 mm
and maximum product width of 420 mm.
WITH automatic loading.
Execution ground and polished.
Checkweigher 300 I 20.10.00.300
Digital weighing system with transport speed up to 1,300 mm/s.
For cleaning it, the checkweigher must not be dismantled.
Checkweigher completely made of stainless steel.
Mono checkweigher, consisting of:
weighing table length approx. 485 mm, width approx. 450 mm
capacity up to 100 weight measurements/min. (depending on portions)
max. weight of portion: 3,000 g, resolution 0.2 g
weighing table with round belts.
Rocker
(integrated in Speed-Loader)
3 track rocker
Mono rocker
length 450 mm.
Execution with round belts
Speed-Loader 903 CCA 20.40.00.000
Automatic high-speed loader, providing the die formats for the packaging
machine and infeeding them into it. Loader housing in lift design. All belts
are powered by speed-driven servo motors. The transport equipment can be
easily removed for cleaning. The line divider is positioned by a servo-driven
ball roller spindle. The photoelectric barriers are shock-protected. The
speed-loader has its own controller which is linked to the machine
controller. The Slicer and loader are both operated from the same position.
The maximum diameter of the lower film roller of the packaging machine
is 800 mm.
In certain cases the speed-loader CCA works as loading aid only, manual
correction might be necessary.
4-track grouping conveyor
dividing X to 4
1-track line dividing
Line dividing 1 to X
set-up with 4-track clamping piece, without line dividing
With 4 buffering conveyors,
length approx. 500 mm.
Infeed conveyor
usable width approx. 530 mm,
length of conveyor approx. 1,200 mm.
WITH upper reject conveyor
Additional increase of the feet 903 SFE 30.00.00.000
For Slicer model MCS.
1 Pc. Weber-knife, sickle shaped WSM 00.10.10.400
Execution without teeth
coated, without coated cutting edge.
Distance centre of rotor to cutting edge 400 mm
1 Pc. blade guard for Weber knife, sickle shaped
Blade guard for Weber knife, sickle shaped, distance 400 mm.
4 Pcs. Downholder NH 20.10.00.000
Downholder, pneumatic execution
Execution with roller
4 Pcs. Automatic round grippers for calibrated products ARK
for caliber from 95 up to 98 mm
for meat- and sausage products
Remarks:
Product grippers, downholders and sickleknives are chosen in accordance with
the original customer's products only after putting the machine into
operation and will therefore be invoiced only on delivery! For automatic
products grippers in combination with preformed slicing bars an application
technology test is always necessary!