Computerslicer CCS 602 A 200
Touch Control
Elau drive
High performance Slicer for slicing meat, sausage and cheese
Products into slices with adjustable thickness of 0,1 to 50 mm.
The sliced portions are transported by the transfer-unit CCU,
consisting of portioning conveyor and a control conveyor.
Machine control system with user-friendly interface.
Machine made completely of solid stainless steel,
Product carrier PZF 10.30.30.000
Carrier unit for product length up to 1,200 mm
Product support belt. The support belt moves forwards up to the slicing bar
after the loading procedure. At the end of each slicing procedure the support
belt is pulled back pneumatically and in this way clears an opening for the
ejection of the end pieces. The conveyor belt runs synchronously with the
gripper by which it is driven. The support conveyor and the conveyor belt can
be removed from the machine.
Execution for very hard products (e.g. raw ham)
- product carrier reinforced, max. product length 1,000 mm
- height of the slicing throat fixed at 120 mm
- mounting arm reinforced
- portioning conveyor with flat belt, fourfold, divided
- pressure intensifier
Transfer unit CCU 10.10.10.000
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. It is attached to the discharge
side of the Slicer and able to be swung out from the side. The inclination of
the CCU can be set progressively. The transport means and
the rollers can be easily removed.
CCU standard,
with portioning conveyor and control conveyor.
portioning conveyor with flat belt, fourfold, divided
Length of portioning conveyor approx. 170 mm,
Control conveyor with round belts,
Length of control conveyor approx. 510 mm,
Knife head MKF 50.10.00.000
Circular knifehead SK 144
separate knife drive
for variable speed increasing ratio
Slicing throat SST 80.20.00.000
width adjustable up to 360 mm,
Height adjustable from 125 up to 165 mm
Downholder, pneumatic
Sensor for identification of beginning of product PAS
A photo eye is mounted in the product feed area
to identify the beginning or front of the product.
Loading BEL 40.00.00.000
Loading arm for lifting the products from a horizontal postion
to the feeding level with a timing belt connected in series.
The unit is designed for a maximum product lenth of 900 mm
and width of 340 mm.
Recommended for short products (e.g. ham)
With automatic loading.
Checkweigher CCW-100 10.00.00.000
Digital weighing system with transport speed up to 1,000 mm/s.
Checkweigher completely made of stainless steel.
Mono checkweigher standard,
weighing-table length 485 mm, width 370 mm,
capacity up to max. 100 weight measurements/minute
(depending on portions)
max. portions weight 3,000 g,
resolution (precision and display +/- 0,2 g)
weighing-table with round belts.
Transport conveyor CCE-100 36.20.50.000
Heavy version of a stationary transport conveyor. Belt for transporting the
sliced portions from the Slicer to the packaging machine. The conveyor belt
can be easily removed from the belt frame without using any tools.
The transport speed is controlled by the Slicer.
The transport conveyor can alternatively be equipped
with an inclinable end piece and also with a reject conveyor.
Length of transport conveyor, including spanner, 3.600 mm
Table extension of conveyor swinging out,
length of spanner 900 mm, inclinable
Belt-width: approx. 420 mm
Marking conveyor,
length of conveyor 400 mm,
product staggering on side 50 mm
Additional increase of the feet SFE 20.00.00.000
The increase mainly consists of spacers
in order to equal irregularities of the floor.
For Slicer model MLC.
1 Pc. Slicing bar SKE 10.10.00.000
Standard execution
horizontal straight
1 Pc. Weber circular knife WKM 10.10.20.460
Angle, cutting edge 22°
Execution without teeth
coated, without coated cutting edge.
Diameter 460 mm
1 Pc. Blade guard for Weber circular knife,
for Weber circular knife with diameter 460 mm
2 Pcs. Downholder NH 20.10.00.000
Downholder in pneumatic execution
Execution with roller
1 Pc. Automatic product grippers APR 18.08.10.000
for product width from 181 up to 200 mm
for product height from 81 up to 100 mm
for meat and sausage products
Product grippers, downholders & circular knifes are chosen in accordance with
the original customer's products. For automatic products grippers in
combination with preformed slicing bars an application technology test is
always necessary! The number of grippers results from the applications.