GPS Reisacher
Weber CCS 902 MCS SLICER
Used machines Item No: 904447
Condition used slicing line, fully reconditioned
Areas of application Meat and sausage productsCheeseVegan
Weber CCS 902 MCS
Weber CCS 902 MCS
High Capacity Slicing Machine with weighing line
Short links
Computerslicer CCS 902 MCS

Computerslicer CCS 902

Touch Control
ELAU drive

High performance Slicer for slicing meat, sausage and cheese
products into slices with adjustable thickness of 0.1 up to 50 mm.

Slicing throat, width continuously adjustable up to 380 mm,
(depending on machine execution).

Machine control system with user-friendly interface.

Machine made completely of solid stainless steel.

Product carrier PZF 10.20.10.010
Carrier unit for product length up to 1.200 mm.
Product support belt. The support belt moves forward up to the slicing bar
after the loading procedure. At the end of each slicing procedure the support
belt is pulled back pneumatically and in this way clears an opening for the
ejection of the end pieces. The conveyor belt runs synchronously with the
gripper by which it is driven. The support conveyor and the conveyor belt can
be removed from the machine.
Execution ground and polished
without lateral pressure device.
The clearance height can be progressively adjusted from 125 to 180 mm.

Transfer unit CCU 15.60.10.000
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. The basic function can be
implemented with each CCU variant. The transfer unit is attached to the
discharge side of the Slicer. It can be set progressively in a horizontal or
vertical position or at an angle. The transport means and
the rollers can be easily removed for cleaning.

CCU Standard with portioning and control conveyor the CCU
expanded as followed:

CCU for making shaved meat portions and for making it possible to lower the
portioning conveyor pneumatically. In shaved meat portioning mode, the
shaved meat conveyor and the control conveyor are used. In portioning
conveyor lowering mode, the portioning conveyor is lowered at the start of
the slice procedure in order to remove slices from the product stream
which are not used for portioning. The portioning conveyor takes up its
normal position before starting to cut the first portion of the desired slice
quality. The CCU then operates as a standard CCU until the end of the slicing
procedure.
If a speed loader CCA follows this CCU, it is operated as an auxiliary infeed
with the portions needing to be manually corrected in the packaging machine.

Portion completion
Portion completion is a function to move incomplete portions from the
portioning conveyor to the control conveyor at the end of a slicing
procedure. These portions are returned on the portioning conveyor in order
for them to be completed once the next slicing procedure begins.
The completed portion afterwards is transferred to the control conveyor for
further transport to the subsequent units.

Length of portioning conveyor approx. 150 mm,
Length of control conveyor approx. 600 mm.
Portioning conveyor with flat belts,
Control conveyor with round belts.

Slicing bar SKE 20.10.00.000
Slicing bar carrier with external gap adjustment.
With this system, it is possible to adjust the cutting gap progressively
from the operator side of the machine housing.
The clearance height can be adjusted in steps.

Knife head MKF 50.00.00.000
Circular knife head SK 144 (Easy Lock)
Speed increasing ratio 1: 7

Top product guide PVO 00.00.10.000
with pneumatic Downholders

Loading BEL 20.00.00.000
Loading arm for lifting the products from a horizontal position to the
feeding level.
The unit is designed for a maximum product length of approx. 1.200 mm
and a maximum product width of approx. 380 mm.
With automatic loading.

Slice Folding Device CFV 10.00.00.000
The device folds each of the individual slices while they are being placed
on the portioning conveyor in order to be split up into portions.
The device is suitable for processing soft products with a diameter
or a product height of at least 90 mm.

Modules after the slicer CCS 902 MCS

Checkweigher CCW 200 10.10.00.100
Digital weighing system with transport speed up to 1,300 mm/s.
For cleaning it, the checkweigher must not be dismantled.
Checkweigher completely made of stainless steel.

Mono-checkweigher
Weighing table, length approx. 485 mm, width approx. 375 mm
capacity up to 100 weight measurements/min. (depending on portions)
max. weight of portion: 1.000 g, resolution 0.1 g
weighing table with round belts.

Rocker (integrated in Speed Loader)
3-track rocker enclosed in washdown proof stainless steel cabinet
Mono rocker
length approx. 450 mm
width approx. 400 mm
Execution with round belts

Speed-Loader CCA 20.40.10.500
Automatic high-speed loader, providing the die formats for the packaging
machine and infeeding them into it. Loader housing in lift design. All belts
are powered by speed-driven servo motors. The transport equipment can be
easily removed for cleaning. The line divider is positioned by a servo-driven
ball roller spindle. The photoelectric barriers are shock-protected. The
speed-loader has its own controller which is linked to the machine
controller. The Slicer and loader are both operated from the same position.
The maximum diameter of the lower film roller of the packaging machine
is 800 mm.

In certain cases the speed-loader CCA works as loading aid only,
manual correction might be necessary.

4-track grouping conveyor, with 4-drives,
currently set-up for 3-track application!

1-track line dividing
Line dividing 1 to X

set-up with 3 track clamping piece 3x approx. 105 mm width, on one axis

With 4 buffering conveyors,
length approx. 500 mm.

Infeed conveyor
usable width approx. 390 mm,
length of conveyor approx. 1,200 mm.

WITH upper reject conveyor

Shingle/stack loader WCS
The WCS shingle stacker unit is for creating multi-layer shingled portions
and/or loading flat stacked packages. The WCS shingle stacker unit is an add-
on device for the speed loader CCA. The portions are taken from the infeed
conveyor and placed over the basins of the forming packaging machine by means
of a shingle stacker.
Belt width approx. 380 mm

Slicer accessories CCS 902 MCS

Additional increase of the feet SFE 30.00.00.000
For Slicer model MCS.

1 Pc. Slicing bar SKE 10.23.10.105
Standard execution
Preformed slicng bar, triple
Preformed slicing bar, round
Calibre 105 mm

1 Pc. Weber circular knife WKM
Angel, cutting edge 22°
without teeth
coated, without coated cutting edge
Diameter 460 mm

1 Pc. blade guard for Weber ciruclar knife
for Weber cirucular knife of diameter 460 mm

3 Pcs. Downholder NH
Downholder, pneumatic execution
Execution with roller

3 Pcs. Round grippers for calibrated products ARK
for product calibre from approx. 96 up to 105 mm
for meat and sausage products

Others CCS 902 MCS

Remarks:
Product grippers, downholders and sickle knives are chosen in accordance with
the original customer's products only after putting the machine into
operation and will therefore be invoiced only on delivery! For automatic
products grippers in combination with preformed slicing bars an application
technology test is always necessary!