GPS Reisacher
Weber CCS 804 MCS SLICER
Used machines Item No: 904504
Condition used slicing line, fully reconditioned
Areas of application Meat and sausage productsCheeseVegan
Weber CCS 804 MCS
Weber CCS 804 MCS Weber CCS 804 MCS
Computerslicer with cpl. weighing line
Short links
Computerslicer CCS 804 MCS

Computerslicer CCS 804
Touch Control
Elau Drive

High performance Slicer for slicing meat, sausage and cheese Products into
slices with adjustable thickness of 0,1 to 50 mm.

The sliced portions are transported by the transfer-unit CCU, consisting of
portioning conveyor and a control conveyor.

Machine control system with user-friendly interface.

Machine made completely of solid stainless steel.

Automatic central loading system.

Maximal cutting performance 1,500 slices/minutes.

  • including 1 slicing bar, horizontal, straight
  • including product holder arm support
  • including Sensor for identification of beginning of product
  • including end piece reject conveyor

Loading BEL

Full automatic infeed

With a preceding indexing conveyor connected in series
for product length up to 1,200 mm

Product carrier PZF-LL

Carrier unit for product length up to 1,200 mm

Execution for sausage and ham

With a lateral pressure device

The unit is designed for a maximum product width of 400 mm.

Top product guide PVO

The product guide unit is a driven belt which is pneumatically pressed onto
the product from above and helps convey and stop when it comes to idle cuts.
With three product guide units.

Sensor for identification of beginning of product PAS
A photo eye is mounted in the product feed area to identify
the beginning or front of the product.

Blade head MKF

Involute blade head

Drive for idle cut support
The additional idle cut support largely prevents the product-related tendency
to create fines and feathering and ensures that the first and last slices of
a portion are parallel.

With automatic Slicing gap adjustment
Automatic slicing gap adjustment with cutting gap sensor which guarantees
constantly good slicing results even during the use of blades with different
extents of wear.

Slicing throat SST

Slicing throat
Height adjustable from 125 up to 180 mm

Transfer unit CCU

The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. It is attached to the discharge
side of the Slicer and is able to get pivoted to the operator side.
The inclination of the CCU can be set progressively without any tools.
The conveyor belts and rollers can be easily removed.

Multi application CCU with portioning and control conveyor,
control conveyor with drive 1 and 2,
for a proof transport of the portion
and for reducing idle cut distance if necessary.

Portion designer CCU
A CCU with a special portioning conveyor that transverses to create a side
shingle or other special portion shapes. The portioning conveyor moves
parallel to the slicing bar as the product is sliced. Maximum transversal
movement is 150 mm.

Stacking CCU
For creating stacks with a maximum height of 80 mm. The stacking CCU consists
mainly of a lowerable portioning conveyor and a control conveyor. The slices
cut by the slicer are taken from the portioning conveyor, which is lowered
about the slice thickness during each slicing procedure in order to maintain
the same drop height for the individual slices. The stacks are passed from
the portioning conveyor on to the control conveyor for further transport to
the subsequent units.

Slice folding device CFV

The device folds each of the individual slices while they are being placed on
the portioning conveyor in order to form portions.
The device is suitable for processing soft products with a diameter
or a product height of at least 90 mm.
Additional folding shaft with 40 mm Diameter.

Modules after the slicer CCS 804 MCS

Checkweigher CCW-200

Digital weighing system with transport speed up to 1,300 mm/s. Checkweigher
housing beveled. The checkweigher need not be dismantled for cleaning.
Checkweigher completely made of stainless steel.

Triple checkweigher

Weighing table width 3 x 150 mm

Weighing table length 485 mm
Capacity up to 100 weight measurements per minute (depending on portions)
Max. weight of portion: 1,000 g (three tracks) (+/- 0.2 g)

Execution with round belts

Rocker CCR

Rocker with three possible positions enclosed in a stainless steel cabinet.

Mono rocker
Length: approx. 580 mm
Width: approx. 540 mm

Rocker with small transitions entry-sided to achieve a smoother transport
of the sliced portions.

Execution with round belts

Compact Loader CPL

Automatic loader, providing the die formats for the packaging machine and
infeeding them into it. All belts are powered by speed-driven servo motors.
The transport equipment can be easily removed for cleaning. The photoelectric
barriers are shock-protected. The compact loader has its own controller which
is linked to the machine controller. The Slicer and loader are both operated
from the same position.
(The maximum diameter of the lower film roller of the packaging machine is
800 mm).

Basic model includes:

  • transport conveyor with trapezoidal belts
  • without line dividing
  • infeed conveyor
  • grouping, buffer and infeed conveyor with conveyor belts
  • cut off length (thermoforming machine) up to 920 mm
  • film width up to 460 mm.

In certain cases the compact loader CPL works as infeeding aid only, manual
correction might be necessary. Total length of Compact Loader is limited to
max 5.8 mtrs.

Transport conveyor with trapezoidal belts

1-track line dividing,
line dividing 1 to X, 2 to 4

grouping conveyor with 4 drives
set-up for 3-lines application 3x 130 mm

with 4 buffering conveyors
length approx. 500 mm

Infeed Conveyor
usable width approx. 380 mm,
belt length approx. 1,700 mmm

WITH Top reject conveyor

Slicer accessories CCS 804 MCS

Additional increase of the feet SFE
The increase mainly consists of spacers in order to
equal irregularities of the floor.
For Slicer model MCS.

1 Pc. Slicing bar SKE
Standard execution
Slicing bar horizontal, straight

1 Pc. Weber-knife, sickle shaped WSM
without teeth
coated, without coated cutting edge.
Distance centre of rotor to cutting edge 400 mm

1 Pc. blade guard for Weber knife, sickle shaped
Blade guard for Weber knife, sickle shaped, distance 400 mm

3 Pcs. Automatic product grippers
for product caliber from approx. 100 up to 110 mm
for meat- and sausage products

1 Pc.
Cleaning trolley CLT

Cleaning trolley to hold the slicer components which must be removed for
cleaning purposes.

Following designs are available in order to carry all relevant accessories
of a slicer in initial equipment:

  • blades
  • product grippers
  • downholders
  • portioning conveyor
  • deflection rollers
  • axis of portioning conveyor, control conveyor
Others CCS 804 MCS

Stand-alone lift-loading conveyor CHB

The lift-loading system adjusts the height of the product stream before
the slicer.

Lift-loading conveyor width: 450 mm

Loading conveyor: length 1,000 mm

Product guide on timing belt with gap loading system
Maximum product height: 200 mm
For 3 products

Remarks:
Product grippers, downholders and knives are chosen in accordance with the
original customer's products only after putting the machine into operation
and will therefore be invoiced only on delivery! For automatic products
grippers in combination with preformed slicing bars an application technology
test is always necessary!