Benefits
- Independent drives for 2-track applications with different product lengths.
- Very little give-away, high product yield, high proportion
of correct weight portions. Idle cycle rotor for consistent slice quality and automatic cutting
gap setting.Adjustable rotor head for gentle cutting guarantees very good
cutting results.- Meets the highest hygiene requirements - based on USDA guidelines
- Ergonomic operation through low infeed and working height
Technical Basics:
Automatic loading through 1,200 mm infeed conveyor or with the optionally
available GEA OptiScanner.
Simple menu navigation on the hinged 15" touchscreen.
Rapid outfeed through the 3-stage portioning conveyor reduces
the number of idle cuts for greater output performance.
Outstanding presentation of the cutting results through the latest knife
technology.
- Cutting performance: 50 - 1.500 cuts/min.
- Product lengths: 260 - 1.200 mm
slice thickness: 0.6 - 5 mm
Pieces: 3 - 30 mm
- Product width max.: 2x 240 mm up to a product height of 140 mm
Product height max.: 200 mm with a product width of up to 2x 124 mm
Product height minimal: 40 mm
- Compressed air requirement: 6 bar per ISO 8573 (7:4:4) 15 - 600 l/min
Connected load: 11 kVA
Ambient temperature: - 2 to +25°C
- Noise emission: </=76 dB at 1.000 rpm per EN ISO 11204
Machine execution for 2-lane independent drive
Color of the belts: blue
Automatic loading with infeed belt
- stainless steel slicing bar for 4x caliber D 95 mm
Pneumatic system for max. 4 product holders Connections
4 product holders Diam. 80 mm for Caliber 95 mm
PremiumBlade straight for boiled sausage
First language - German
Selection overview:
GEA DualSlicer 1200
Foot
based on the height of 1,040 mm
Product stop
safety shutter - coated
Feeding belt
2-lane, independently driven, 1,200 mm
Belt set
with smooth surface for infeed belt 1,200 mm
Belt set
with smooth surface for product support 1,200 mm
Stop - set of lateral guides on the product support
for product widths from 125 - 250 mm per track
Traction shaft, set
Supports the product guidance through the profiled traction roller,
increases the consistency of the slice thickness
Pressure belt
2x upper traction belt, small, left
Pressure belt
2x upper traction belt, small, right
Shear edge
to guide the product during slicing with best precision
as it is dedicated to the product
Product gripper
4x as specified above
GEA PremiumBlade
R 470, coated, straight
Transport device
1x unit for a safe transport, exchange and storage of a blade.
Portioning conveyor, 3-stage
Portioning and transfer conveyor with stacking function for shingled,
zig-zag and normal stacked portions up to 80 mm
RFID login key set
Basic equipment with USB master key, starter set with 5 pieces each
identification cards per level 1-3 and 3 per level 4-5
RFID login reader
Covering
Required machine housing component if the start and end-piece discharge
conveyor is deselected.
Safety device
Covers in relation to GEA Check 4000
GEA Check 4000
Benefits:
- High performance weighing system up to 150 portions/min. per weighing track
- The small track pitch of 23 mm with multi-lane running scales simplifying
product transport Precise weighing with a weight resolution of +/- 0.1 g
Applications from 1 to 4-lanes possible product transport
with either straps or round belts- Stainless steel hygiene for easy and efficient cleaning with inclined
surfaces, and easy removal of all four side panels and floor board - Simple, tool-free straps/belts removal on multilane scales through
alternately arranged in swivel or pivot rollers in in-line scale.
Technical Basics:
The GEA Check 4000 is a high precision weighing system for the determination
of individual weights of cut portions and pieces. The cutting machine
evaluates the individual weights directly, responding immediately to changes
in product and optimizes the average weight over a longer production period.
Both weighing programs (recipes) and reports generated are stored in the
cutting machine and from there easily readable via an optional USB interface.
The weighing range per track is 20 - 5.000 g.
The number and width of tracks are defined as listed below.
GEA Check 4000 consisting of:
Basic frame on adjustable feet with one weighing cell per track
Table width of check weigher: 4x 115 mm, belt version
Color of the belts: blue
First languarge: German
GEA ShingleLoader 600, 3x buffer 800 mm
Benefits:
- Quick, efficient and highly precise layout of diverse portion forms
following the die set configuration of the packaging machine. - Buffer conveyor bridge the slicer reload time for a continuous production
of the packaging machine. A pivoting loader part facilitates the access to the forming section of the
packaging machine.High product safety due to hygienic machine design
- Quick changeable belts secure a time saving and effective cleaning
and short changeover time.
Technical Basics:
Automatic loading of shingle, zig-zag and stacked portions into the packages
of a thermoforming machine.
Basic execution of the machine:
Stainless steel
Coloured 15" touch-screen display for easy operation
1x Adjustment gauge for spreading conveyor
Stroke length: 800 mm max.
Usable width: 500 mm at the infeed / 600 mm at the outfeed
Portion height: 70 mm max.
Electrical connection: 3 x 400 V + N +PE (+/- 10%)
Frequency: 50/60 Hz
Back-up fuse: 3 x NH 35 Ampere
Connected Load: 16 kVA
Nominal pressure: 6 bar
Compressed air consumption: 40 Nl/min
Color of the belts: blue
First language: German
GEA ShingleLoader 600, 3x buffers 800 mm
Infeed belt 1-lane
2-layer rocker
For discharging the off-weight portions and the trim cuts,
4-lane application
Spreader belt lower level with 4 spindles
for 4-lane track adjustment
4-track line-up conveyor
Lining up and alignment of single portions to fit the format
of the packaging machine
1-lane infeed conveyor
USB interface and USB stick
RFID login reader
- used slicing line, very good, working condition


