GPS Reisacher
Weber CCS 904 MCS SLICER
Used machines Item No: 904483
Condition used slicing line, fully reconditioned
Areas of application Meat and sausage productsCheeseVegan
Weber CCS 904 MCS
Weber CCS 904 MCS Weber CCS 904 MCS
High Capacity Slicing Machine with weighing line
Short links
Computerslicer CCS 904 MCS

Computerslicer CCS 904 A 200
Touch Control
Elau drive

High Capacity Slicing and Portioning Machine with complete weighing line.

High performance Slicer for slicing meat, sausage and cheese products.

The product feed for slicing will be effected infeed-sided via a loading
conveyor (length approx. 900 mm, width approx. 450 mm).

The fully automated central loading incl. product support conveyor assures
the product feed in correct positional arrangement.

The second conveyor which is located between the product support conveyor and
the slicing bar serves in corporation with the top product guide which is
located above the products for the precise guidance during the slicing
process.

The slicing throat is adjustable as follows:

  • height between 100 to 200 mm
  • width up to 450 mm

A sickle knifehead WSK 3 is the standard cutting system of this machine.

Product carrier 904 PZF-LL 10.00.10.000
Carrier unit for product length up to 1,200 mm.
Execution for sausage and ham
without lateral pressure device.

Transfer unit CCU 904 CCU XX.10.00.010
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. Control conveyor with drive one and two, for a proof transport of
the portion and for reducing idle cut distance if necessary.
According to the application the transfer unit can be adjusted in the height
and running direction into the optimal position. For easy cleaning the unit
can be wheeled-out and it can be exchanged for alternating applications.
Standard CCU with portioning and control conveyor also with:

Stacking CCU (Bacon)
for making stacks of a maximum height of 80 mm. The stacking CCU consists
mainly of a lowerable portioning conveyor and a control conveyor. The slices
cut by the Slicer are taken from the portioning conveyor, which is lowered by
the thickness of the cut slice during each slicing procedure in order to
maintain the same drop height for the individual slices. The stacks
are passed on to the control conveyor by the portioning conveyor for further
transport to the subsequent units.

Incl. front end slices removal conveyor, for transporting away the first
slices and/or the last incomplete portion.

Portion completion.
Portion completion is a function to move incomplete portions from the
portioning conveyor to the control conveyor at the end of a slicing
procedure. These portions are returned on the portioning conveyor in order
for them to be completed once the next slicing procedure begins.
The portion is then transferred to the control conveyor for further transport
to the subsequent units.

Length of portioning conveyor approx. 130 mm, with flat belts,
Control conveyor 1: Length approx. 320 mm, with round belts,
Control conveyor 2: Length adjustable from approx. 300 - 450 mm,
with round belts.

Slicing bar SKE 20.10.00.000
Slicing bar completely made of solid stainless steel
Preformed slicing bar, double

Knife head MKF 15.00.00.000
Idle cut sickle knife head WSK 3
including drive for idle cut support for speeds from 200 to 1,500 revolutions
per minute. The additional idle cut support largely prevents the product-
related tendency to form scraps and ensures that the first and last slices of
a portion are parallel.

Top product guide PVO 21.00.00.000
The product guide unit is a powered belt which is pneumatically pressed onto
the product from above and helps convey, stop and, in the event of idle
cutting, withdraw it.
With two product guide units.

Modules after the slicer CCS 904 MCS

Checkweigher CCW 36.00.00.000
Digital weighing system with transport speed up to 1,300 mm/s.
For cleaning it, the checkweigher must not be dismantled.
Checkweigher completely made of stainless steel.

Short-Tandem-checkweigher, consisting of:
2x tandem weighing table, length approx. 315 mm, width 2x approx. 225 mm
capacity up to 100 weight measurements/min. (depending on portions)
max. weight of portion (tandem): 2x 3,000 g, resolution 0.2 g.
The combi-weighing of tracks is possible.
Weighing table with round belts.

Rocker CCR XX.00.00.010
Rocker enclosed in washdown proof stainless steel cabinet.
Tandem rocker with intermediate conveyor, with transfer needles,
Length of inermediate conveyor approx. 330 mm
Length of rocker approx. 330 mm
Width approx. 540 mm
Rocker with small transitions infeed-sided and transfer needles,
to achieve a smoother transport of sliced portions.
Execution with round belts

Rocker (integrated in Speed Loader)
3-track rocker enclosed in washdown proof stainless steel cabinet
Mono rocker
length approx. 450 mm
width approx. 400 mm
Execution with round belts

Speed-Loader CCA 20.40.10.500
Automatic high-speed loader, providing the die formats for the packaging
machine and infeeding them into it. Loader housing in lift design. All belts
are powered by speed-driven servo motors. The transport equipment can be
easily removed for cleaning. The line divider is positioned by a servo-driven
ball roller spindle. The photoelectric barriers are shock-protected. The
speed-loader has its own controller which is linked to the machine
controller. The Slicer and loader are both operated from the same position.
The maximum diameter of the lower film roller of the packaging machine
is 800 mm.

In certain cases the speed-loader CCA works as loading aid only,
manual correction might be necessary.

4-track grouping conveyor, with 4-drives.

1-track line dividing
Line dividing 1 to X, 2 to 4

With 4 buffering conveyors,
length approx. 500 mm.

Infeed conveyor
usable width approx. 390 mm,
length of conveyor approx. 1,200 mm.

WITH upper reject conveyor

Slicer accessories CCS 904 MCS

Additional increase of the feet 904 SFE 30.00.00.000
The increase mainly consists of spacers in order to
equal irregularities of the floor.
For Slicer model MCS.

1 Pc. Weber-knife, sickle shaped WSM 00.10.10.400
without teeth
coated, without coated cutting edge.
Distance centre of rotor to cutting edge 400 mm

1 Pc. blade guard for Weber knife, sickle shaped
Blade guard for Weber knife, sickle shaped, distance 400 mm

2 Pcs. Automatic product grippers APR
for product width from approx. 160 up to 180 mm
for product height from approx. 60 up to 80 mm
for bacon, meat- and sausage products

Others CCS 904 MCS

Remarks:
Product grippers, downholders and knives are chosen in accordance with the
original customer's products only after putting the machine into operation
and will therefore be invoiced only on delivery! For automatic products
grippers in combination with preformed slicing bars an application technology
test is always necessary!