Computerslicer CCS 904 A 200
Touch Control
Elau drive
High Capacity Slicing and Portioning Machine with complete weighing line.
High performance Slicer for slicing meat, sausage and cheese products.
The product feed for slicing will be effected infeed-sided via a loading
conveyor (length approx. 900 mm, width approx. 450 mm).
The fully automated central loading incl. product support conveyor assures
the product feed in correct positional arrangement.
The second conveyor which is located between the product support conveyor and
the slicing bar serves in corporation with the top product guide which is
located above the products for the precise guidance during the slicing
process.
The slicing throat is adjustable as follows:
- height between 100 to 200 mm
- width up to 450 mm
A sickle knifehead WSK 3 is the standard cutting system of this machine.
Product carrier 904 PZF-LL 10.00.10.000
Carrier unit for product length up to 1,200 mm.
Execution for sausage and ham
without lateral pressure device.
Transfer unit CCU 904 CCU XX.10.00.000
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. Control conveyor with drive one and two, for a proof transport of
the portion and for reducing idle cut distance if necessary.
According to the application the transfer unit can be adjusted in the height
and running direction into the optimal position. For easy cleaning the unit
can be wheeled-out and it can be exchanged for alternating applications.
Standard CCU with portioning and control conveyor also with:
Stacking CCU (Bacon)
for making stacks of a maximum height of 80 mm. The stacking CCU consists
mainly of a lowerable portioning conveyor and a control conveyor. The slices
cut by the Slicer are taken from the portioning conveyor, which is lowered by
the thickness of the cut slice during each slicing procedure in order to
maintain the same drop height for the individual slices. The stacks
are passed on to the control conveyor by the portioning conveyor for further
transport to the subsequent units.
Incl. front end slices removal conveyor, for transporting away the first
slices and/or the last incomplete portion.
Length of portioning conveyor approx. 130 mm, with flat belts,
Control conveyor 1: Length approx. 320 mm, with flat belts,
Control conveyor 2: Length adjustable from approx. 300 - 450 mm,
with round belts.
Slicing bar SKE 20.10.00.000
Slicing bar completely made of solid stainless steel
Preformed slicing bar, double
Knife head MKF 15.00.00.000
Idle cut sickle knife head WSK 3
including drive for idle cut support for speeds from 200 to 1,500 revolutions
per minute. The additional idle cut support largely prevents the product-
related tendency to form scraps and ensures that the first and last slices of
a portion are parallel.
Top product guide PVO 21.00.00.000
The product guide unit is a powered belt which is pneumatically pressed onto
the product from above and helps convey, stop and, in the event of idle
cutting, withdraw it.
With two product guide units.
Vario gripper, twofold
This gripper consists of two fastenings.
The vario gripper does offer the advantage that it produces
a maximum of on-weight portions and a minimum give-away.
Checkweigher CCW 36.00.00.000
Digital weighing system with transport speed up to 1,300 mm/s.
For cleaning it, the checkweigher must not be dismantled.
Checkweigher completely made of stainless steel.
Short-Tandem-checkweigher, consisting of:
2x tandem weighing table, length approx. 315 mm, width 2x approx. 225 mm
capacity up to 100 weight measurements/min. (depending on portions)
max. weight of portion (tandem): 2x 3,000 g, resolution 0.2 g.
The combi-weighing of tracks is possible.
Weighing table with round belts.
Rocker CCR XX.00.00.010
Rocker enclosed in washdown proof stainless steel cabinet.
Tandem rocker with intermediate conveyor
Length of inermediate conveyor approx. 330 mm
Length of rocker approx. 330 mm
Width approx. 540 mm
Rocker with small transitions infeed-sided and transfer needles,
to achieve a smoother transport of sliced portions.
Execution with round belts
Transport conveyor CCE-MOV 46.00.18.520
Moveable transport conveyor
Conveyor to transport the portions from the Slicer to the packaging machine.
The conveyor belt can be easily removed from the belt frame without using any
tools. The transport speed is controlled by the Slicer. The transport
conveyor can alternatively be equipped with a reject conveyor.
The height of the transport conveyor (upper edge) is optional adjustable.
Length of transport conveyor, including spanner, 4,600 mm
Top reject conveyor, length 2,600 mm
Belt width 520 mm
Additional increase of the feet 904 SFE 20.00.00.000
The increase mainly consists of spacers in order to
equal irregularities of the floor.
For Slicer model SLC.
1 Pc. Weber-knife, sickle shaped WSM 00.10.10.400
without teeth
coated, without coated cutting edge.
Distance centre of rotor to cutting edge 400 mm
1 Pc. blade guard for Weber knife, sickle shaped
Blade guard for Weber knife, sickle shaped, distance 400 mm
2 Pcs. Automatic product gripper - Vario gripper
The vario gripper does offer the advantage that it produces
a maximum of on-weight portions and a minimum give-away.
for product width from approx. 160 up to 180 mm
for product height from approx. 60 up to 80 mm
for bacon, meat- and sausage products
Remarks:
Product grippers, downholders and knives are chosen in accordance with the
original customer's products only after putting the machine into operation
and will therefore be invoiced only on delivery! For automatic products
grippers in combination with preformed slicing bars an application technology
test is always necessary!


