GPS Reisacher
GEA DualSlicer II SLICER
Used machines Item No: 904546
Areas of application Meat and sausage productsCheeseVegan
GEA DualSlicer II
GEA DualSlicer II GEA DualSlicer II
High Capacity Slicing Machine with weighing line
Short links
Description DualSlicer II

Benefits

  • Independent drives for 2-track applications with different product lengths.
  • Very little give-away, high product yield, high proportion
    of correct weight portions.
  • Idle cycle rotor for consistent slice quality and automatic cutting
    gap setting.

  • Adjustable rotor head for gentle cutting guarantees very good
    cutting results.

  • Meets the highest hygiene requirements - based on USDA guidelines
  • Ergonomic operation through low infeed and working height

Technical Basics:
Automatic loading through 1,200 mm infeed conveyor or with the optionally
available GEA OptiScanner.
Simple menu navigation on the hinged 15" touchscreen.
Rapid outfeed through the 3-stage portioning conveyor reduces
the number of idle cuts for greater output performance.
Outstanding presentation of the cutting results through the latest knife
technology.

  • Cutting performance: 50 - 1.500 cuts/min.
  • Product lengths: 260 - 1.200 mm
  • slice thickness: 0.6 - 5 mm

  • Pieces: 3 - 30 mm

  • Product width max.: 2x 240 mm up to a product height of 140 mm
  • Product height max.: 200 mm with a product width of up to 2x 124 mm

  • Product height minimal: 40 mm

  • Compressed air requirement: 6 bar per ISO 8573 (7:4:4) 15 - 600 l/min
  • Connected load: 11 kVA

  • Ambient temperature: - 2 to +25°C

  • Noise emission: </=76 dB at 1.000 rpm per EN ISO 11204

Machine execution for 2-lane independent drive

Color of the belts: blue
Automatic loading with infeed belt

  1. stainless steel slicing bar for 4x caliber D 95 mm

Pneumatic system for max. 4 product holders Connections
4 product holders Diam. 80 mm for Caliber 95 mm
PremiumBlade straight for boiled sausage

First language - German

Selection overview:
GEA DualSlicer 1200

Foot
based on the height of 1,040 mm

Product stop
safety shutter - coated

Feeding belt
2-lane, independently driven, 1,200 mm

Belt set
with smooth surface for infeed belt 1,200 mm

Belt set
with smooth surface for product support 1,200 mm

Stop - set of lateral guides on the product support
for product widths from 125 - 250 mm per track

Traction shaft, set
Supports the product guidance through the profiled traction roller,
increases the consistency of the slice thickness

Pressure belt
2x upper traction belt, small, left

Pressure belt
2x upper traction belt, small, right

Shear edge
to guide the product during slicing with best precision
as it is dedicated to the product

Product gripper
4x as specified above

GEA PremiumBlade
R 470, coated, straight

Transport device
1x unit for a safe transport, exchange and storage of a blade.

Portioning conveyor, 3-stage
Portioning and transfer conveyor with stacking function for shingled,
zig-zag and normal stacked portions up to 80 mm

RFID login key set
Basic equipment with USB master key, starter set with 5 pieces each
identification cards per level 1-3 and 3 per level 4-5

RFID login reader

Covering
Required machine housing component if the start and end-piece discharge
conveyor is deselected.

Safety device
Covers in relation to GEA Check 4000

GEA Check 4000

Benefits:

  • High performance weighing system up to 150 portions/min. per weighing track
  • The small track pitch of 23 mm with multi-lane running scales simplifying
    product transport
  • Precise weighing with a weight resolution of +/- 0.1 g

  • Applications from 1 to 4-lanes possible product transport
    with either straps or round belts

  • Stainless steel hygiene for easy and efficient cleaning with inclined
    surfaces, and easy removal of all four side panels and floor board
  • Simple, tool-free straps/belts removal on multilane scales through
    alternately arranged in swivel or pivot rollers in in-line scale.

Technical Basics:
The GEA Check 4000 is a high precision weighing system for the determination
of individual weights of cut portions and pieces. The cutting machine
evaluates the individual weights directly, responding immediately to changes
in product and optimizes the average weight over a longer production period.
Both weighing programs (recipes) and reports generated are stored in the
cutting machine and from there easily readable via an optional USB interface.
The weighing range per track is 20 - 5.000 g.
The number and width of tracks are defined as listed below.

GEA Check 4000 consisting of:
Basic frame on adjustable feet with one weighing cell per track

Table width of check weigher: 4x 115 mm, belt version
Color of the belts: blue

First languarge: German

GEA ShingleLoader 600, 3x buffer 800 mm

Benefits:

  • Quick, efficient and highly precise layout of diverse portion forms
    following the die set configuration of the packaging machine.
  • Buffer conveyor bridge the slicer reload time for a continuous production
    of the packaging machine.
  • A pivoting loader part facilitates the access to the forming section of the
    packaging machine.

  • High product safety due to hygienic machine design

  • Quick changeable belts secure a time saving and effective cleaning
    and short changeover time.

Technical Basics:
Automatic loading of shingle, zig-zag and stacked portions into the packages
of a thermoforming machine.

Basic execution of the machine:

Stainless steel

Coloured 15" touch-screen display for easy operation
1x Adjustment gauge for spreading conveyor

Stroke length: 800 mm max.
Usable width: 500 mm at the infeed / 600 mm at the outfeed

Portion height: 70 mm max.
Electrical connection: 3 x 400 V + N +PE (+/- 10%)
Frequency: 50/60 Hz
Back-up fuse: 3 x NH 35 Ampere
Connected Load: 16 kVA
Nominal pressure: 6 bar
Compressed air consumption: 40 Nl/min

Color of the belts: blue

First language: German

GEA ShingleLoader 600, 3x buffers 800 mm

Infeed belt 1-lane

2-layer rocker
For discharging the off-weight portions and the trim cuts,
4-lane application

Spreader belt lower level with 4 spindles
for 4-lane track adjustment

4-track line-up conveyor
Lining up and alignment of single portions to fit the format
of the packaging machine

1-lane infeed conveyor

USB interface and USB stick

RFID login reader

  • used slicing line, very good, working condition